Watlow Series 93 User Manual download pdf (Page 45)

Ordering Information

(2219)

93 _ _ - 1 _ _ _ - 0 0_ _

Part Number

Microprocessor-based

1/16 DIN, Single Input, Dual Output,

Two-, Four-Digit Displays

IP65/NEMA 4X

Option

A=Without IP65/NEMA 4X Rating

B=With IP65/NEMA 4X Rating

CE Option

A=Without CE

B=With CE

Output 1

C=Switched dc output, non-isolated

D=Electromechanical relay, Form C, 5A,

without contact suppression

2, 3

F=Process, 4-20mA (dc), non-isolated

K=Solid-state relay, Form A, 0.5A, without

contact suppression

Output 2

A=None

C=Switched dc output, non-isolated

D=Electromechanical relay, Form C, 5A,

without contact suppression

2, 3

K=Solid-state relay, Form A, 0.5A,

without contact suppression

Line Voltage/Power

0=100 to 240V~ (ac) nominal (high voltage)

1=12 to 24Vı (ac/dc) (low voltage)

X=Custom Parameters

Display

Upper/Lower

RR = Red/Red

RG = Red/Green

GR = Green/Red

GG = Green/Green

XX = Custom Overlay

To effect IP65/NEMA 4X rating requires a minimum mounting panel thickness of 1.5 mm (0.06 inch)

and surface finish not rougher than 812µ mm (0.32µ inch). Use Greenlee punch #60287.

Electromechanical relays warranted for 100,000 closures only. Solid-state switching devices recom-

mended for applications requiring fast cycle times or extended service life.

Switching inductive loads (relay coils, etc.) requires using an RC suppressor. Quencharc from ITW

PAKTRON is recommended, Watlow part number 0804-0147-0000.

Watlow Series 93 Appendix ■ A.13

Appendix

Series 93 Model Number Information

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments

Watlow Series 93 User Manual Page 45

Comments to this Manuals

Related products and manuals for Sensors Watlow Series 93