Watlow Series F4S/D User Manual Page 28
- Page / 152
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
3.12 ■ Operations Watlow Series F4S/D
Operations Page Parameter Table Modbus
Register
Range read/write Conditions for
Parameter Description (Modbus Value) Default [I/O, Set, Ch] Parameters to Appear
✔
NOTE: Press the Information Key ˆ for more task-related tips.
Active if PID Units (Setup Page)
is set to U.S. and Proportional
Band is not set to 0.
2A 2B Set
2504 2554 [6]
2514 2564 [7]
2524 2574 [8]
2534 2584 [9]
2544 2594 [10]
r/w
0.00 minutes
(0)
0.00 to 9.99 minutes
(0 to 999)
Rate x (A or B)
Set the rate time.
Active if PID Units (Setup Page)
is set to SI and Proportional
Band is not set to 0.
2A 2B Set
2503 2553 [6]
2513 2563 [7]
2523 2573 [8]
2533 2583 [9]
2543 2593 [10]
r/w
0.00 minutes
(0)
0.00 to 9.99 minutes
(0 to 999)
Derivative x (A or B)
Set the derivative
time.
Active if PID Units (Setup Page)
is set to U.S. and Proportional
Band is not set to 0.
2A 2B Set
2502 2552 [6]
2512 2562 [7]
2522 2572 [8]
2532 2582 [9]
2542 2592 [10]
r/w
0 per minute
(0)
0.00 per minute to
99.99 per minute
(0 to 9999)
Reset x (A or B)
Set the reset time in
repeats per minute.
Active if PID Units (Setup Page)
is set to SI and Proportional
Band is not set to 0.
2A 2B Set
2501 2551 [6]
2511 2561 [7]
2521 2571 [8]
2531 2581 [9]
2541 2591 [10]
r/w
0 minutes
(0)
0.00 to 99.99 minutes
(0 to 9999)
Integral x (A or B)
Set the integral time
in minutes.
Active: Always (Channel 1).
2A 2B Set
2500 2550 [6]
2510 2560 [7]
2520 2570 [8]
2530 2580 [9]
2540 2590 [10]
r/w
25°F (25)
14°C (14)
0 to 30000
(1 to 30000)
Proportional Band x (A or B)
Set the proportional
band.
Main > Operations > Edit PID > PID Set Channel 2 > PID Set x (6 to 10)
PID Set x (6 to 10)
Active if Proportional Band is set
to 0 and one channel is set to
heat and the other to cool
(Setup Page).
1A 1B Set
507 557 [1]
517 567 [2]
527 577 [3]
537 587 [4]
547 597 [5]
r/w
3 (3)1 to 30000
(1 to 30000)
Hysteresis x (A or B)
Define the process
variable change from
the set point re-
quired to re-energize
the output (in on-off
mode).
Active if Proportional Band is not
set to 0 and one output is set to
heat and the other to cool
(Setup Page).
1A 1B Set
505 555 [1]
515 565 [2]
525 575 [3]
535 585 [4]
545 595 [5]
r/w
0
(0)
0 to 30000
(0 to 30000)
Dead Band x (A or B)
Define the effective
shift in the heating
and cooling set
points to prevent
conflict.
Active if PID Units (Setup Page)
is set to U.S. and Proportional
Band is not set to 0.
1A 1B Set
504 554 [1]
514 564 [2]
524 574 [3]
534 584 [4]
544 594 [5]
r/w
0.00 minutes
(0)
0.00 to 9.99 minutes
(0 to 999)
Rate x (A or B)
Set the rate time.
- User’s Manual 1
- Series F4S/D 1
- About Watlow Winona 2
- About This Manual 2
- Your Comments 2
- Technical Assistance 4
- Warranty 4
- Chapter One: Introduction 5
- 5. Run the Profile 6
- 3. Customize and Name 7
- 4. Program the Profile 7
- 2. Set up the F4 7
- Setup Steps 8
- Navigation 9
- Displays and Indicator Lights 10
- Press < to scroll 11
- > Move Up/Increase 12
- Guided Setup 13
- . to enter 14
- . to move to the 14
- < to go 14
- > and < 15
- Main Page 16
- Chapter Three: Operations 17
- Profile Control π 18
- To Resume a Profile on Hold 19
- To Hold a Running Profile 19
- Alarm Set Points 20
- Auto-tune PID 20
- Edit PID 20
- Multiple PID Sets 21
- Cascade Setup Procedure 22
- Cascade Autotuning Procedure 22
- . again 23
- Operations Page Map 26
- Autotune PID Cascade 27
- Autotune PID 27
- PID Set x (6 to 10) 28
- Autostart 34
- Ramp Time 34
- Ramp Rate 34
- Profile Plan Checklist 35
- How to Program a New Profile 36
- 6.Choose the end-state 37
- 7.Save your settings 37
- How to Edit a Profile 38
- User Profile Record 39
- Military Standard 810D 40
- Profiles Page Map 43
- Wait for: 45
- Event Output 46
- Analog Input x (1 to 3) 46
- Chapter Five: Setup 49
- Customizing the Main Page 50
- Input2 Cal. Offset 51
- Control Output x 52
- Scale Low: 0% 1-second Filter 53
- Setup Page Map 54
- Main > Setup > System 55
- Digital Input x (1 to 4) 58
- Retransmit Output x (1 and 2) 60
- Alarm Output x (1 and 2) 60
- Digital Output x (1 to 8) 61
- Communications 62
- Static Message 63
- Process Display 63
- Custom Main Page 63
- Setup Page Parameter Record 64
- Chapter Six: Features 65
- Inputs/Outputs 66
- Temperature 67
- Control Methods 68
- Dead Band 69
- Burst Fire 70
- Other Features 71
- Advanced Features 74
- Chapter Seven: Communications 77
- Series F4 Modbus Registers 78
- (expressed in percent) 79
- For more information 81
- Profile Parameters 86
- For more information about 91
- F4 Modbus Applications: 93
- (page 1 of 3) 96
- (page 2 of 3) 97
- Page Map 97
- (page 3 of 3) 98
- Jump Step End Step 99
- Renaming a Profile - F4 101
- Note: There are ten 101
- Modbus Registers for 101
- Overview 103
- Change a Password 104
- Set Lockout Menu Map 104
- Enter a Password 104
- Use a Password 104
- Set Lockout 105
- Chapter Nine: Calibration 107
- Calibrating the Series F4 108
- Process Output Procedure 110
- Retransmit Output Procedure 111
- Calibration Menu Map 112
- Calibrate Input x (1 to 3) 113
- Chapter Ten: Diagnostics 115
- Diagnostic 116
- Register 117
- Main > Factory > Test 118
- Chapter Eleven: Installation 119
- Panel Cutout 120
- Chapter Twelve: Wiring 123
- Power Wiring 124
- Thermocouple 125
- 0-20mA or 4-20mA Process 125
- 0 to 50mV 125
- Inputs x (2 and 3) 126
- Digital Inputs x (1 to 4) 128
- Outputs x (1A, 1B, 2A and 2B) 129
- Retransmit and Alarm Output 130
- Digital Outputs x (1 to 8) 131
- EIA/TIA-232 Connections 132
- EIA-232 or 133
- ICS Model 4899 133
- 59 60 61 62 134
- Appendix 135
- Glossary 136
- Series F4 139
- Specifications 140
- Ordering Information 141
- 5.10, 6.2 142
- List of Figures 147
- Series F4 Software Map 150
- Setup Page see Chapter 5 151
- Factory Page 151
- How to Reach Us 152
Related products and manuals for Sensors Watlow Series F4S/D
Sensors Watlow Series SD User Manual
(8 pages)
(8 pages)
Sensors Watlow Series F4S/D User Manual
(102 pages)
(102 pages)
Sensors Watlow Series SD Limit User Manual
(60 pages)
(60 pages)
Sensors Watlow Series PD User Manual
(188 pages)
(188 pages)
Sensors Watlow Series V4 User Manual
(21 pages)
(21 pages)
(80 pages)
Sensors Watlow Silver Series EM User Manual
(18 pages)
(18 pages)
Sensors Watlow Silver Series OIT User Manual
(14 pages)
(14 pages)
Sensors Watlow Series V4T User Manual
(26 pages)
(26 pages)
Sensors Watlow TLM-8 User Manual
(8 pages)
(8 pages)
© 2020, manymanuals.com. All rights reserved. | 1.437 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals